0086-020-39005284
| Quantity: | |
|---|---|
R125A
YRBEST
I. Product Description:
R125FA/B is a rubber treatment agent, which effectively treats rubber materials and does not require roughing. It also has excellent treating effect on dark rubber and dark rubber will not turn white.
II. Techinal data
Product Model | R125FA | B Powder |
Appearance | Colorless transparent liquid | White powder or granules |
Drying Time（55±5℃，Min) | 2～4 | 2～4 |
Shelf life（5~35℃) | 6 months | 6 months |
III. User's Guidlines:
1.Mix B powder into R125FA at a ratio of 2-3%, primarily for treating dark-colored rubber, ensuring complete dissolution and thorough mixing.
2.After cleaning the surface of the footwear material, evenly apply the treatment agent onto the material surface using a brush or cotton cloth.
3.Drying Time: Dry in an oven at 55±5°C for 2-4 minutes before applying adhesive. Ensure that the adhesive is evenly applied without missing or excess adhesive.
4.Avoid using metal containers; only use plastic or ceramic containers for storage.
IV. Operation Process
V. Precautions:
1. Prior to bulk usage, it is imperative to conduct a confirmatory trial.
2. This product is a chemical product; therefore, keep it away from children, sources of ignition, and moisture.
3. Store in a cool and dry place (5-35°C).
4. For detailed information, refer to the Material Safety Data Sheet (MSDS).
I. Product Description:
R125FA/B is a rubber treatment agent, which effectively treats rubber materials and does not require roughing. It also has excellent treating effect on dark rubber and dark rubber will not turn white.
II. Techinal data
Product Model | R125FA | B Powder |
Appearance | Colorless transparent liquid | White powder or granules |
Drying Time（55±5℃，Min) | 2～4 | 2～4 |
Shelf life（5~35℃) | 6 months | 6 months |
III. User's Guidlines:
1.Mix B powder into R125FA at a ratio of 2-3%, primarily for treating dark-colored rubber, ensuring complete dissolution and thorough mixing.
2.After cleaning the surface of the footwear material, evenly apply the treatment agent onto the material surface using a brush or cotton cloth.
3.Drying Time: Dry in an oven at 55±5°C for 2-4 minutes before applying adhesive. Ensure that the adhesive is evenly applied without missing or excess adhesive.
4.Avoid using metal containers; only use plastic or ceramic containers for storage.
IV. Operation Process
V. Precautions:
1. Prior to bulk usage, it is imperative to conduct a confirmatory trial.
2. This product is a chemical product; therefore, keep it away from children, sources of ignition, and moisture.
3. Store in a cool and dry place (5-35°C).
4. For detailed information, refer to the Material Safety Data Sheet (MSDS).
